NEWS Center

26

2022

-

12

Monkey car liner manufacturer: What are the characteristics of monkey car liners?

Classification:


【Summary description】Introduction to the manufacturer of Monkey Car Liner: Monkey Car Liner, officially known as the mine cableway, is mainly used in underground mines. The steel wire rope is installed on the driving wheel, supporting wheel, pressing wheel, and winding wheel, and tightened by a tensioning device. The driving device outputs power to drive the driving wheel and steel wire rope to operate, thus realizing the principle of transporting miners. The underground mine uses an aerial cableway to transport miners, with the aim of shortening the travel time for miners to and from the well, Reduce the physical energy consumption of miners going up and down the well.

Introduction to the manufacturer of Monkey Car Liner: Monkey Car Liner, officially known as the mine cableway, is mainly used in underground mines. The steel wire rope is installed on the driving wheel, supporting wheel, pressing wheel, and winding wheel, and tightened by a tensioning device. The driving device outputs power to drive the driving wheel and steel wire rope to operate, thus realizing the principle of transporting miners. The underground mine uses an aerial cableway to transport miners, with the aim of shortening the travel time for miners to and from the well, Reduce the physical energy consumption of miners going up and down the well.

The manufacturer of monkey car liners introduces that monkey car liners are mainly used to prevent direct contact between the crown block and the steel rope. The liner plays a very important role in the service life of the steel rope. When the steel rope runs, it will rotate. If the coefficient of friction is too high, it will hinder the rotation of the steel rope and damage the steel rope. In this case, the steel rope must be poured into the shaft with as little resistance as possible to reduce torque and rotational stress.

The monkey car liner has extremely low coefficient of friction and high wear resistance. On the one hand, it reduces the wear of the crown gear, while allowing the steel rope to rotate freely, making it safer and extending the service life of the steel rope. So what are the characteristics of the monkey car liner? Monkey car liner manufacturer introduces it to you!

(1) Good impermeability, the chemical properties of the lining are impermeability, resistance to various oils and corrosive liquids, and high safety. The extremely low coefficient of friction and extremely high wear resistance can release the rotation of the steel wire rope during operation at the lining block of the crown block, preventing the steel wire rope from winding onto the friction wheel and causing rope slipping.

(2) Long service life, under the same industrial and mining conditions, it is 3-8 times that of other materials in China, with good processability. The special hardness of the wheel lining block facilitates the turning of the rope groove, extending its service life.

(3) Effectively extending the service life of the steel wire rope, with a small coefficient of friction, good wear resistance, reduced damage to the steel wire rope, and effectively extending the service life of the steel wire rope.

The monkey car drive wheel pad is used on the drive wheel, with a diameter of 0.8 to 1.2 meters. The drive wheel pad bears all the weight of the steel rope, the weight of the container, the weight of the cargo, the balance of the tail weight, as well as various dynamic and impact loads during operation. The pad is a circular body with a trapezoidal cross-section, without the need for clamping plates and fasteners, making installation and maintenance fast, reducing the weight of the drive wheel, and reducing labor intensity during disassembly and assembly, It can avoid direct friction between the steel rope and the steel part of the drive wheel, without generating sparks, and effectively prevent gas explosion. The friction pad, also known as the block, is installed on the drive wheel or friction wheel to provide power lift for the drive wheel. A very important component of the load.

At the same time, the protection of steel wire ropes and driving wheels is more reliable, significantly improving the service life of the equipment and reducing the operating cost of the cableway, making it suitable for use on overhead cableways in mining tunnels.