【Summary description】Monkey car liner manufacturer: Monkey car, officially known as mining cableway, is mainly used in underground mines. The steel rope is installed on the driving wheel, supporting wheel, pressing wheel, and winding wheel, and tightened by a tensioning device. The driving device outputs power to drive the driving wheel and steel rope to operate, thus realizing the principle of transporting miners. The purpose of using underground mining aerial ropeways to transport miners is to shorten the travel time for them to and from the well and reduce their physical energy consumption.
Monkey car liner manufacturer: Monkey car, officially known as mining cableway, is mainly used in underground mines. The steel rope is installed on the driving wheel, supporting wheel, pressing wheel, and winding wheel, and tightened by a tensioning device. The driving device outputs power to drive the driving wheel and steel rope to operate, thus realizing the principle of transporting miners. The purpose of using underground mining aerial ropeways to transport miners is to shorten the travel time for them to and from the well and reduce their physical energy consumption.
Monkey car liner manufacturer: The monkey car liner installed on the friction wheel (or main wheel) of the elevator is a very important component used to drive steel ropes and increase load in friction elevators. The quality of friction performance directly affects the working ability, efficiency, safety, and other aspects of the elevator. Considering the important role of the monkey car pad, the crown wheel guide wheel pad must have compressive strength and sufficient friction coefficient with the steel rope to prevent slipping during the lifting process.
Manufacturer of monkey car liner: the limit of monkey car liner is mostly mine hoist system, steel rope on mine hoist, steel rope grease, liner, etc. to improve the stability of the system. Select high-performance liner, high-quality steel rope, high-quality steel rope grease, to ensure the stability of the mine lift coefficient, and ensure that there is no sliding rope, friction pad falling off, steel wire rope aging and breaking, and mine increase and breaking. Friction elevators use the friction between steel ropes and friction pads to transmit power, thereby improving the weight and people. Different materials have different friction coefficients. Monkey car liners can simultaneously protect the steel rope. On the macro level, while ensuring the support strength, the softer the material of the crown wheel guide wheel liner, the more favorable it is for the steel rope. On the micro level, the liner material cannot contain high hardness particles. Many manufacturers have developed monkey car liners that can prevent crown wheel wear, reduce steel rope wear, extend the service life of the steel rope, and greatly reduce the cost and workload of replacing the crown wheel and steel rope.
Monkey car liner manufacturer: The installation and replacement standards of monkey car liners must be strictly implemented in accordance with the regulations in order to reduce changes in the lifting center, reduce wear on the tank and guide groove (device), extend the service life of the crown wheel, protect the steel rope, and achieve good application results. Liner materials should be selected based on the use environment and working conditions, with the goal of extending the life cycle, reducing replacement frequency, and improving equipment operating efficiency, Reasonable technical parameters such as radial thickness of the pad, rope depth, and rope groove radius are the key to pad optimization.
The driving wheel of the monkey car mainly relies on the friction between the steel rope and the pad to transmit power. If the friction coefficient between them is too low, it will cause the monkey car to not work properly. Given the important role of the monkey car drive wheel pad, it is required that the monkey car pad must have sufficient compressive strength and a sufficient friction coefficient with the steel wire rope to prevent sliding during the lifting process. The monkey car liner is made of imported polymer material, which has the advantages of high wear resistance and high friction coefficient. The driving wheel effectively extends the service life of the machine and reduces the operating cost of the cableway.
1. The transition block is suitable for single rope mine hoists, and is used when the steel wire rope is wound in more than one layer but less than four layers. If it is greater than four layers (including four layers), it is not applicable.MORE +
Since 2012, affected by factors such as declining market demand, lagging transformation and upgrading of the coal industry, and heavy tax burden and historical burden, the coal industry has experienced structural overcapacity, falling prices, corporate losses and other problems, which have made it more difficult to operate. In order to promote the smooth operation and sustainable and healthy development of the coal industry, with the consent of the State Council, the following opinions are hereby proposed:MORE +
The International Energy Agency (IEA) recently released a mid-term report on the coal market, which pointed out that due to the low exchange rate of the Australian currency in the next five years, China's coal demand for Australia is expected to increase.MORE +